Showtec Octostrip Set MKII

More Views

Showtec Octostrip Set MKII

Manufacturer: ShowTec

Availability: In stock

Warranty: 48 Hours

Showtec Octostrip Set MKII contains:

8 x Octostrip 1m

1 x Controller

1 x Power input cable CEE16B Male to Powercon

8 x Cable 1m DMX 5m

Case available at extra cost.

 

The LED Octostrip MKII is the successor of the popular Octostrip. It is a complete plug-and-play set; consisting of 8 LED strips, a controller and eight 5-meter long XLR extension cables. The new LED Octostrip MKII can control each strip's 8 individual RGB sections, along with the corresponding dimmer and strobe settings. The controller supports ArtNet protocol, which facilitates the use of device while operating in the full RGB mode (192CH mode). It has updated color presets and built-in color flows for use of horizontal and vertical directions which are accessible via DMX (in 6CH, 8CH, 14CH, 26CH and 50CH channel modes). Because of the exact same hardware design It is possible to combine the Octostrip MKI to the new Octostrip MKII in one stage. However, in such case, it is not advisable to operate the old and the new version of the device in Auto mode, as the built-in programs differ per version. The 6CH mode has the same DMX channel settings to control both sets in one setup.

 

Specs:

 

Strips

Length: 1m

Sections: 8

Cable length: 1m

Connection: 5p XLR male connector

LED system: 5050 RGB

Rigging: M10 sliding profile

Dimensions: 1000 x 30 x 50 mm

Weight: 1,4 Kg

IP Rating: IP-20

 

Controller

Input voltage: 100~240VAC, 50/60Hz

Power consumption: 90W at full output

On Board: Display

Modes: DMX, Auto, Sound, Manual

Control protocol: DMX-512, Artnet

Control personality: 6Ch, 8Ch, 14Ch, 26Ch, 50Ch, 192Ch, 208Ch

Color: Black

Housing: Metal

Outputs: 5p XLR female

Max cable length: 6m

Data connections: XLR 3p & RJ-45

Power connections: Pro power in- & output

Dimensions: 360 x 200 x 95 mm

Weight: 2,3 Kg

Certification: CE

Max. ambient temp: 40°  

$451 ( 395€ )

Ships from Tildonk, Belgium

Details

Showtec Octostrip Set MKII contains:

8 x Octostrip 1m

1 x Controller

1 x Power input cable CEE16B Male to Powercon

8 x Cable 1m DMX 5m

Case available at extra cost.

 

The LED Octostrip MKII is the successor of the popular Octostrip. It is a complete plug-and-play set; consisting of 8 LED strips, a controller and eight 5-meter long XLR extension cables. The new LED Octostrip MKII can control each strip's 8 individual RGB sections, along with the corresponding dimmer and strobe settings. The controller supports ArtNet protocol, which facilitates the use of device while operating in the full RGB mode (192CH mode). It has updated color presets and built-in color flows for use of horizontal and vertical directions which are accessible via DMX (in 6CH, 8CH, 14CH, 26CH and 50CH channel modes). Because of the exact same hardware design It is possible to combine the Octostrip MKI to the new Octostrip MKII in one stage. However, in such case, it is not advisable to operate the old and the new version of the device in Auto mode, as the built-in programs differ per version. The 6CH mode has the same DMX channel settings to control both sets in one setup.

 

Specs:

 

Strips

Length: 1m

Sections: 8

Cable length: 1m

Connection: 5p XLR male connector

LED system: 5050 RGB

Rigging: M10 sliding profile

Dimensions: 1000 x 30 x 50 mm

Weight: 1,4 Kg

IP Rating: IP-20

 

Controller

Input voltage: 100~240VAC, 50/60Hz

Power consumption: 90W at full output

On Board: Display

Modes: DMX, Auto, Sound, Manual

Control protocol: DMX-512, Artnet

Control personality: 6Ch, 8Ch, 14Ch, 26Ch, 50Ch, 192Ch, 208Ch

Color: Black

Housing: Metal

Outputs: 5p XLR female

Max cable length: 6m

Data connections: XLR 3p & RJ-45

Power connections: Pro power in- & output

Dimensions: 360 x 200 x 95 mm

Weight: 2,3 Kg

Certification: CE

Max. ambient temp: 40°  

Note:

Customer Reviews

X